Clear Tail Light Lens and LED Board
For CTL-0084-IT
Remove old taillight and install new taillight. Yellow wires are used for turn signal wires. Connect one yellow wire to each positive turn signal wire. Make sure to test each side prior to final connection making sure you have the correct sides blinking.



Clear Tail Light Lens and Large LED Board
For CTL-0038-L, CTL-0038-IT, LED-38-IT
Install Instructions
1. Remove socket and wires from inside taillight as shown in photo.
2. Place board in and install screws.
3. Connect wire from LED board: Black - ground / Green - brake / Red - running.
4. Install clear taillight cover.



Clear Tail Light Lens and LED Bulb - No Bracket Required (old)
Install Instructions



Clear Tail Light Lens and LED Bulb - With Bracket (older)
Install Instructions

DISCLAIMER: NOPORK.com accepts no responsibility for the accuracy of any information and all information is provided as a reference source. A professional mechanic should always perform all modifications and/or service work. If performed incorrectly, you may endanger the safety of you and others and possibly invalidate your manufacturers warranty.

Mail comments suggestions and or pictures to Nopork.com Staff